BDF S8MC Window Film Security and Safety 8 Mil Clear – 36In X 24Ft
Price range: $38.99 through $337.99
- Description
- Additional information
- Reviews (0)
Description
- MINIMIZE PROPERTY DAMAGE by absorbing impact from break-in attempts and holding shattered glass together. This film is applied to the interior side of the window.
- PASSES ANSI Z97.1 CLASS B and CPSC CATEGORY 1 testing requirements. Increase security or add safety to tempered or non-tempered glass.
- CRYSTAL CLEAR film with 99% UV REJECTION. Reduces fading of interior furnitures caused by the sun. Not intended for heat control.
- STRONG ADHESIVE and film to slow down intruders. Adhesive on the film (thicker layer) is protected by release liner (thinner layer).
- HIGH QUALITY MATERIALS that can last many years. Free tools (squeegee and knife) and installation guide are provided.
Product description
-
Secure and Protective
CLEAR 8 MIL SECURITY & SAFETY FILM
S8MC security film also helps maintain the structural integrity of windows during a hurricane.
-
Prevent Glass Hazard
HOLDING SHATTERED GLASS TOGETHER
Minimizes the risk of dangerous shards being propelled into your home, reduces the chance of injury.
-
KEEP YOUR LIFE SAFER
BARRIER AGAINST UNWANTED EVENTS
Creates a protective layer that absorbs impact energy, making the glass much harder to break open.
-
Same Film the Pros Use
Protecting Homes and Commercial Properties
We wanted to bring the same security films that businesses use to the public.
EXCELLENT VISIBILITY AND CLARITY
S8MC is unmatched in terms of visibility and clarity. Good for homes and office buildings that are directly exposed to the public, these clear security glass films provide excellent safety and protection while remaining essentially unseen. These thick safety films are perfect for your windows.
STORM PROTECTION
In the event of high winds and flying debris, if the glass does break, the film holds the shattered pieces together, keeping the glass intact. This can prevent wind-driven rain from entering your home, which can cause water damage.
PREVENT SHATTERING, REDUCE ADDITIONAL DAMAGE
Security films are made of a strong, durable polyester material. When applied to windows, it creates a protective layer that absorbs and distributes impact energy, making the glass much harder to break open. This minimizes the risk of dangerous shards being propelled into your home.
EXCELLENT UV BLOCKING BARRIER
S8MC window film provides an excellent UV-blocking barrier. Being exposed to UV rays can cause skin problems such as premature aging skin and signs of wrinkles and eye problems. The S8MC film rejects about 99% of the UV rays, helping to reduce fading on your precious furniture and pictures.
Security Film S8MC Specification Data & Comparison
|
Customer Reviews
|
4.2 out of 5 stars 155 |
4.4 out of 5 stars 8,686 |
3.4 out of 5 stars 28 |
4.2 out of 5 stars 34 |
3.9 out of 5 stars 25 |
4.4 out of 5 stars 20 |
4.1 out of 5 stars 2 |
|
VLT (How dark is it?)
|
87% / CLEAR | 89% / CLEAR | 8% / VERY DARK | 19% / DARK | 35% / MEDIUM | 50% / LIGHT | 16% / DARK |
|
COLOR / THICKNESS
|
CLEAR / 8 MIL | CLEAR / 4 MIL | BLACK / 8 MIL | BLACK / 8 MIL | BLACK / 8 MIL | BLACK / 8 MIL | SILVER / 4 MIL |
|
PRIVACY Type
|
NONE | NONE | DAYTIME | DAYTIME | MILD | NONE | DAYTIME |
|
UVR (Ultraviolet rejection)
|
99% BLOCKING | 99% BLOCKING | 99% BLOCKING | 99% BLOCKING | 99% BLOCKING | 99% BLOCKING | 99% BLOCKING |
|
TSER (Amount of heat blocked)
|
16% REDUCTION | 16% REDUCTION | 37% REDUCTION | 33% REDUCTION | 28% REDUCTION | 24% REDUCTION | 79% REDUCTION |
|
DUAL PANE Compatibility
|
Compatible | Compatible | Compatible | Compatible | Compatible | Compatible | Compatible |
|
INSTALLATION Location
|
Inside of the window | Inside of the window | Inside of the window | Inside of the window | Inside of the window | Inside of the window | Inside of the window |
Window film installation tips
-
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
video
Merchant Video
Overview of the installation steps
WINDOW FILM INSTALLATION GUIDE (3 minutes)
We provide tools and information to help make the DIY work easier. The video guide shows an overview of the installation steps. Reviewing and following the proper steps allows a clean and smooth application process, so that you can then enjoy the benefits of the newly installed window film – whether it is the energy efficiency made possible by a sun control film, the added protection and peace of mind of a security film, or the stylish aesthetics of a decorative film.
-
Overview of the installation steps
WINDOW FILM INSTALLATION GUIDE (1 minute)
We provide tools and information to help make the DIY work easier. The video guide shows an overview of the installation steps. Reviewing and following the proper steps allows a clean and smooth application process, so that you can then enjoy the benefits of the newly installed window film – whether it is the energy efficiency made possible by a sun control film, the added protection and peace of mind of a security film, or the stylish aesthetics of a decorative film.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.video
Merchant Video
-
Using ample soapy water solution
THE #1 TIP FOR A SUCCESSFUL WINDOW FILM INSTALLATION
Using an excessive amount of water solution (16 oz. water + 8 drops liquid soap such as baby shampoo) will make handling the film easier. Spraying water solution on the adhesive as you pull off the liner will prevent the film from being too sticky. This will also reduce or eliminate the potential for wrinkles and bubbles during installation.
Once the film is properly placed on the window, the soapy water should be pushed out using the squeegee with appropriate pressure applied.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.video
Merchant Video
-
The best way to remove the clear backing liner
HOW TO REMOVE THE CLEAR BACKING LINER FROM THE FILM
Attached to the film is a clear layer called the backing liner. This layer covers the adhesive or cling side of the actual film layer; the liner needs to be removed when you install the film.
The best way is to use two pieces of tape on a corner (one on each side, facing each other). One piece would grab onto the film, and the other onto the liner. Press the tapes together, and then slowly separate the two pieces to pull the two layers away from each other.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.video
Merchant Video
-
Spray water solution as you remove backing liner
HOW TO HANDLE THE STICKY WINDOW FILM
Static reaction happens when the backing liner is taken apart from the film. It may cause the film to stick to itself, which makes that film useless. To prevent this, spray the soapy water solution as you carefully pull off the backing liner.
The window surface should also be sprayed with plenty of the soapy water. This can be used to clean the window before applying the film, and allows you to move the film around on the window without it getting stuck on the surface.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.video
Merchant Video
-
Why does the film not stick to the window? / Why did the film fall off from the window a few hours later?
There is a clear “backing liner” layer attached to the actual “film” layer. The backing liner covers the adhesive on the film so that the film does not prematurely stick. When you install the film, the backing liner needs to be peeled off from it.
-
Which of the two layers is the film, and which is the backing liner?
The actual window film that you install is thicker than the backing liner, which would be removed and discarded when you install the film. The side of the film that the backing liner is covering has the sticky adhesive.
-
Which thickness should I get? / Should I use the 4 mil or the 8 mil?
The 8 mil is stronger against impact, but the greater thickness makes it more difficult to install properly. The 4 mil is recommended if you mainly need a safety film, which holds shattered glass pieces together in case of glass breakage.
-
Why did bubbles (or spots where film is not adhering properly) form after the film was installed?
This is due to the moisture left inside. The film may appear fine when installed, but afterwards, the water can interfere with the adhesive and cause bubbles to form. Apply firm pressure with the squeegee and push out the water to prevent bubbles.
-
Is the film applied on the interior or exterior side of the window?
This film is intended for the interior side.
Additional information
| Size | 12In X 49Ft, 36In X 24Ft, 30In X 24Ft, 24In X 12Ft, 48In X 24Ft, 60In X 24Ft, 48In X 12Ft, 30In X 12Ft, 36In X 49Ft, 30In X 49Ft, 24In X 49Ft, 12In X 14Ft, 24In X 24Ft, 48In X 49Ft |
|---|
Be the first to review “BDF S8MC Window Film Security and Safety 8 Mil Clear – 36In X 24Ft”
You must be logged in to post a review.
Related Products
2 Pack Solid Rigid Door Stops - Heavy Duty Door Stoppers Wall Protector with Soft Rubber Tips, Satin Nickel
Reviews
There are no reviews yet.